Resitan CF308 Coldset Resin
This is top quality Urea-furan binder formulated to meet must stringent core manufacturing requirement. Excellent through cure over a wide range of core size and superior surface finish make it an attractive general - purpose resin. Resitan CF308 is suitable for either ferrous or nonferrous foundry.

Description
RESITAN CF308 is top quality Urea- furan binder formulated to meet must stringent core manufacturing requirements. Excellent through cure over a wide range of core sizes and a superior surface finish make it an attractive general – purpose resin.

Applications
RESITAN CF308 is suitable for either ferrous or nonferrous foundries.

Specifications
Viscosity (20 °C) 100 – 150 mpa.s
Density (20 °C) 1.21 ± 0.02 gr/cm3
Furfuryl Alcohol Medium

Direction For Use
RESITAN CF308 is used in combination with hardener(activator) RESITAN H002 or H002/1.

Suggested Laboratory Test
Arrange the fallowing test mixture at 220 °C: 100 parts (by weight) silica sand (A FS 48-52) 0.3 – 0.9 parts( by weight) Resitan H002 or H002/1 1 parts (by weight) Resitan CF308 At first add hardener to sand and mix for 1 – 2 minutes then add Resitan CF308 mix well for another 2 – 3 minutes. The standard cores made from the above compound are cured at room temperature.

Storage Life
Max 6 months.

Storage Conditions
RESITAN CF308 must be kept in a cool place (max. 20°C) in closed drums. keep away from any source of heat and direct sunlight

Safety Precautions
RESIN: Like all these synthetic resin, this material can cause skin irritation which can be more or less severe according to the skin sensitivity of the person concered. Therefore operators should always wear industrial gloves. Activator (hardener) : This catalyst is a solution of different saits in water and in addition to the above precautions eyes should be protected against splashing. In cause of accidental contacts, the affected parts should immediately be flushed whit water.

Packaging
250Kg steel drums.

Note
stir well before use. The information given above is correct to the best of our knowledge without any guarantee. Users should determine the suitability of this product for their purposes by arranging appropriate tests. Resitan company do not accept any liability for loss or damage caused by this product.