SBUP-2075 IsoPhthali
This resin is a high peak exothermic and fiber wet-out .Composite parts made of this resin and glass fiber reinforcement offer very good physical and mechanical and chemical properties, high solvent resistance, low shrinkage and high shelf life. Resitan SBUP-2075 is an engineering resin suggested for use in BMC & SMC composite. Non-volatile = 65±1 % Viscosity = 1100±50 CP Gel time @ 80°C = 60 min Max. Peak Temperature = 250-270°C

Description
RESITAN SBUP-2075 is an unsaturated Isophthtalic Polyester resin.

Applications
RESITAN SBUP-2075 is an engineering resin suggested for use in BMC & SMC composite.

Specifications
Non-volatile 65 ±1 %
Appearance Clear yellowish liquid
Acid Value 18 − 20 mgKOH/g
Color <1.5 Gardner
Viscosity-Brookfield
(spindle 3 & 60 RPM)@25 °C 1100 ± 50 cp
Density @ 25 °C 1.11 ± 0.02g/cm3
Gel time @ 80C(+1.5%trigonox c)max 1h
Peak Exothermic 250−270 ºC

Storage Life
6 months @ Storage Condition.

Storage Conditions
Store at temperature below 20 ºC away from direct sunlight or any heat source. Higher storage temperatures may cause reduction in shelf life.

Safety Precautions
Avoid direct contact with skin and eyes. Necessary eye and body protection should be used. Keep containers sealed to prevent moisture pick up monomer loss. This product is flammable.

Packaging
steel drums of 200Kg net.

Type Of Monomer
Styrene

Note
The information given above is correct to the best of our knowledge without any guarantee. Users should determine the suitability of this product for their purposes by arranging appropriate tests. Resitan company do not accept any liability for loss or damage caused by this product.